LAMAGUARD-10P
CONSTRUCTION

Lightweight APK™ film, scrim reinforced

 
FEATURES
Very light-weight, easy to fabricate
APPLICATION
Covering film for thermal and acoustic insulation
Meets FAR 25.856(a), FAR 25.855, FAR 25.853
Compatible with Lamart LT-16, LT-Hardware and LT-23MD tape

 

PROPERTIES  VALUE TEST METHOD*
PRODUCT WEIGHT (MAX.)
0.67 osy | 22.7 gsm LTM #25A
BURSTING STRENGTH
30 PSI | 207 KN/m2 LTM #29A
T-PEEL (HEAT SEAL) (MIN.)
2.2 lb./in. | 9.8 N/25 mm. LTM #30
PUNCTURE RESISTANCE (MIN.)
   
5mm / 10mm / 20mm probe
3.4# / 6.7# / 14.6# | 15N / 30N / 65N LTM #26
TENSILE (MIN.)
9 lb./in. | 40 N/25 mm. LTM #23
TEAR (MIN.)
3.4 lb. | 15 N LTM #64
12 SEC VERTICAL
Pass  
RADIANT PANEL
Pass  
ROLL SIZES
52 in. x 350 yds. | 1321 mm. x 320 m.
*Contact Customer Service for custom sizes.
 
HEAT SEALING
260oF – 300oF | 127oC – 149oC  
SHELF LIFE
Two (2) years from date of manufacture when stored in original carton under conditions of 70 degrees F. (21 degrees C.) and 50% RH.  

 

*Lamart Test Methods can be obtained through Lamart Corporation Customer Service.

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a
guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values;
individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use. User
assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

we can help every step of the way!

Being a truly vertically integrated supplier of aircraft insulation materials & systems, we are always ready to help you with your aircraft insulation requirements.

Contact Us Today!